Thermal & Acoustic Insulation Materials Supplier in Abu Dhabi, UAE
Energy-compliant building envelope and MEP insulation supplied across the UAE: high-density XPS roof boards, stone wool (rockwool) slabs, fiberglass rolls, EPS panels, closed-cell elastomeric pipe/duct insulation, and foil vapor barriers.
What Thermal & Acoustic Insulation Does Mobasch Trading Supply in the UAE?
Mobasch Trading LLC supplies XPS extruded polystyrene boards, rockwool (stone wool) thermal and acoustic slabs, glasswool blanket rolls, EPS expanded polystyrene sheets, closed-cell nitrile rubber pipe and duct insulation, and foil vapor barriers from Abu Dhabi across the UAE.
Extreme ambient temperatures exceeding 48 °C across the UAE make high-performance roof, facade, partition, and chilled-water insulation essential for municipal green-building compliance and cooling-load reduction. We supply exact densities, thicknesses, and foil facings required by project schedules.
| Material / Line Item | Common Sizes, Grades & Packaging | Primary Construction Application |
|---|---|---|
| XPS Extruded Polystyrene Boards | 50 mm, 75 mm, 80 mm, 100 mm — shiplap/rebated edge, 32–38+ kg/m3 | Inverted concrete flat roofs, podium slabs, cold-store floors, perimeter walls |
| Rockwool (Stone Wool) Slabs & Pipe Sections | 40 kg/m3 to 140 kg/m3 densities (25 mm – 100 mm), plain or FSK foil-faced | Drywall acoustic partitions, curtain-wall firestops, facade rainscreen cladding |
| Glasswool (Fiberglass) Rolls & Boards | 12 kg/m3 to 48 kg/m3 rolls & rigid boards, plain, aluminium FSK, or black tissue | Metal roof purlin under-insulation, HVAC duct wrap, false ceiling acoustic batts |
| EPS Expanded Polystyrene Sheets & Blocks | 15 kg/m3 to 30 kg/m3 molded boards, void-former blocks, Cavity fill | Wall cavity insulation, void filling, lightweight floor buildup, concrete block inserts |
| Elastomeric Nitrile Rubber Insulation | Closed-cell tubes (6 mm – 114 mm ID) & sheets/rolls (9 mm – 32 mm), plain or self-adhesive | Chilled-water pipes, refrigerant copper lines, A/C ducts, condensation prevention |
| Cross-Linked Polyethylene (XLPE) Foam | Chemically cross-linked closed-cell foil-faced rolls (5 mm – 25 mm) | Acoustic underlayment, drainage pipe acoustic wrap, HVAC duct thermal lining |
| Radiant Foil Barriers & Vapor Retarders | FSK reinforced aluminium foil rolls, heavy-duty 250–1000 gauge polythene sheets | Vapor barrier beneath roof insulation and floor slabs, radiant heat reflection |
| Insulation Fixing Pins, Tapes & Adhesives | Plastic/metal spindle pins, FSK aluminium foil tape, rubber contact glue, Foster mastics | Mechanical fastening of facade/soffit slabs and sealing vapor-tight foil joints |
Key Technical Specifications & BOQ Ordering Criteria
Accurate thermal and acoustic insulation pricing in Abu Dhabi depends on material density (kg/m3), board thickness, compressive strength (kPa for roof XPS), fire reaction class, and facing type. Include these details in your BOQ inquiry to Mobasch Trading LLC.
- XPS Compressive Strength & Edge Profile
- Roof and podium XPS typically specifies 300 kPa (or 500 kPa for trafficked/parking decks) compressive strength with shiplap/stepped edges to eliminate thermal bridges.
- Rockwool Density by Application
- Partition acoustic infill typically uses 40–60 kg/m3 slabs, facade cladding uses 70–100 kg/m3, and curtain-wall perimeter fire-stop barriers require high-density 120–140+ kg/m3 slabs.
- Facing Selection (Plain, FSK, BGT)
- Specify plain unfaced slabs for concealed drywall cavities, FSK (Foil-Scrim-Kraft) reinforced aluminium facing for vapor barriers, or Black Glass Tissue (BGT) behind open-joint facades and perforated ceilings.
- Thermal Conductivity (Lambda / R-Value)
- Confirm target thermal resistance (R-value) or maximum U-value specified by Estidama (Abu Dhabi), Al Sa'fat (Dubai), or Barjeel (Ras Al Khaimah) energy regulations.
- MEP Condensation Control
- State pipe outer diameter and insulation wall thickness (e.g., 19 mm, 25 mm, 32 mm) plus aluglass/cladding jacket requirements for outdoor chilled-water lines.
Bulk Supply & Site Delivery Across Abu Dhabi and All UAE Emirates
Mobasch Trading LLC dispatches weather-protected, high-cube truckloads of XPS extruded polystyrene roof panels, rockwool acoustic slabs, glasswool rolls, and elastomeric MEP pipe insulation from Abu Dhabi directly to active construction sites across all seven UAE Emirates, with 24/7 WhatsApp scheduling for phased site installation.
Consolidated Logistics & 24/7 WhatsApp Procurement
- High-volume box and flatbed truck logistics tailored to bulky, low-weight insulation packs so packs arrive dry and undamaged.
- Complete accessory kits including FSK aluminium tapes, spindle insulation pins, contact adhesives, and geotextile filter layers.
- Fast 24/7 WhatsApp quotes (+971 50 775 3530) for commercial towers, warehouses, villas, and MEP packages.
Frequently Asked Questions About Thermal & Acoustic Insulation
Engineering consultants, waterproofing roofers, and fit-out contractors procuring thermal and acoustic insulation materials in Abu Dhabi and the UAE frequently ask about roof XPS thickness, acoustic drywall rockwool density, and fire ratings. Read the answers below or message Mobasch Trading LLC on 24/7 WhatsApp.
Which insulation is standard for inverted flat concrete roofs in Abu Dhabi?
Closed-cell Extruded Polystyrene (XPS) boards in 50 mm to 100 mm thicknesses (with shiplap edges and low water absorption) are the standard thermal layer installed over waterproofing membranes and geotextile on UAE flat roofs.
What rockwool density should I order for gypsum drywall soundproofing?
50 mm or 75 mm thick rockwool slabs in 40 kg/m3 to 60 kg/m3 density are most widely specified inside metal-stud gypsum partitions to boost STC acoustic ratings and fire resistance.
Are rockwool and glasswool non-combustible?
Unfaced mineral wool (rockwool and glasswool) fibers are non-combustible (Euroclass A1), making rockwool the preferred material for fire-rated partitions, steelwork protection, and curtain-wall perimeter firestops.
Do you supply insulation adhesives, FSK tapes, and mechanical pins too?
Yes. We supply self-stick and weld spindle pins, FSK aluminium foil tapes, black glass cloth tapes, elastomeric rubber glue, and vapor-barrier mastics alongside all insulation products.